AFE Firmware Versions

[T0] Switch WiFI

Basic version with relay auto-switch off function

Download

[wpdm_button_template id=2593 style=”blue” align=”left”] [wpdm_button_template id=2583 style=”coffee” align=”left”]

• Hardware:
  • 1 x Relay,
  • 2 x LEDs,
  • up to 2 x  mono/bi-stable switches

• APIs: MQTT, HTTP, Domoticz

• Functionalities:
  • a relay can be controlled by MQTT or/and HTTP protocol
  • a relay can be turned on/off by a button/switch – max 2 buttons/switches could be configured
  • a relay can be manually controlled by external switch even if the device is not connected to a WiFi router
  • there is a possibility to set a default value for a relay after power is restored
  • there is a possibility to set a default value for a relay after connection to MQTT Broker has been established
  • two direction Domoticz integration
  • an automatic relay switch off after a defined time
  • LED can inform about relay state
  • any GPIO can be assigned to relays, LEDs, and switches
  • Device IP address can be fixed or automatically assigned by router DHCP
  • configuration through the internet browser
  • upgrade to a newer version of firmware can be made through the internet browser
  • the configuration panel is in English or Polish
• Other: firmware is preconfigured for Sonoff Basic, Sonoff Touch, Sonoff S20

[T1] WiFi Switch with a temperature sensor (DS18B20)

Version with relay automatic switch off, thermostat and thermal protection function

Download

[wpdm_button_template id=’2791′ style=”blue” align=”left”][wpdm_button_template id=’2735′ style=”coffee” align=”left”]

• Hardware:
  • 1 x Relay,
  • 2 x LEDs,
  • 1 x Temperature sensor DS18B20
  • up to 2 x  mono/bi-stable switches
• APIs: MQTT, HTTP
• Functionalities:
  • Same functionalities as in T0 version and additionally
  • possibility to connect DS18B20 temperature sensor
  • temperature can be corrected manually
  • possibility to choose Celcius or Fahrenheit for temperature
  • temperature reads interval can be defined
  • thermostat function
  • possibility to turn on/off thermostat over the MQTT or HTTP protocols
  • thermal protection function
  • DS18B20 can be connected to any digital GPIO
• Other: firmware is preconfigured for Sonoff Basic, Sonoff Touch, Sonoff S20

[T2] WiFi Switch with a temperature and a humidity sensor (DHxx)

Version with relay automatic switch off, humidistat. thermostat and thermal protection function

Pobierz

[wpdm_button_template id=’2849′ style=”blue” align=”left”][wpdm_button_template id=’2852′ style=”coffee” align=”left”]

• Hardware:
  • 1 x Relay,
  • 1 x LED,
  • 1 x Temperature and humidity sensor: DHT11, DHT21, DHT22
  • up to 2 x  mono/bi-stable switches
• APIs: MQTT, HTTP
• Functionalities:
  • Same functionalities as in T0 version and additionally
  • possibility to connect temperature and humidity sensor DHxx
  • possibility to correct value of temperature and/or humidity
  • possibility to choose Celcius or Fahrenheit for temperature
  • temperature and humidity read interval can be defined
  • thermostat and humidistat functions
  • possibility to turn on/off thermostat and humidistat over the MQTT or HTTP protocols
  • thermal protection function
  • DS18B20 can be connected to any digital GPIO
• Other: firmware is preconfigured for Sonoff Basic, Sonoff Touch, Sonoff S20

[T3] 4 WiFI PIRs and relays

A version supporting up to 4 move detection sensors which can control up to 4 relays

Download

[wpdm_button_template id=’3031′ style=”blue” align=”left”][wpdm_button_template id=’3032′ style=”coffee” align=”left”]

• Hardware:
  • up to 4 x Relays,
  • up to 5 x LEDs,
  • up to 4 x Move detection sensors (PIR)
  • up to 5 x mono/bi-stable switches
• APIs: MQTT, HTTP
• Functionalities:
  • relays can be controlled by MQTT or/and HTTP protocol
  • relays can be turned on/off by buttons/switches – max 5 buttons/switches could be configured
  • relays can be controlled by PIRs
  • there is a possibility to assign a PIR to a relay
  • relays controlled by PIRs can be turned on for a certain time defined by a user
  • a LED can be assigned to a PIR sensor; LED afterward will inform about move’s detections for a particular PIR
  • a device can send MQTT messages whenever a move is detected
  • state of PIR sensor can be checked by sending HTTP Request
  • there is a possibility to set a default value for a relay after power is restored
  • there is a possibility to set a default value for a relay after connection to MQTT Broker has been established
  • any GPIO can be assigned to relays, LEDs, PIRs, and switches
  • Device IP address can be fixed or automatically assigned by router DHCP
  • configuration through the internet browser
  • upgrade to a newer version of firmware can be made through the internet browser
  • the configuration panel is in English or Polish
• Other:
  • Firmware is not pre-configured
  • There is no possibility to connect all listed hardware items to one ESP8266 due to a limited number of GPIOs but I’m giving you options to choose those you need for your specific hardware

[T4] 4 WiFi Switches

This version controls up to 4 relays independently

Download

[wpdm_button_template id=’3191′ style=”blue” align=”left”][wpdm_button_template id=’3190′ style=”coffee” align=”left”]

• Hardware:
  • up to 4 x Relays
  • up to 5 x LEDs
  • up to 5 x mono/bi-stable switches / buttons
• APIs: MQTT, HTTP
• Functionalities 

• • relays can be controlled by MQTT or/and HTTP protocol
  • relays can be turned on/off by buttons/switches – max 5 buttons/switches could be configured
  • it’s possible to control relays without a WiFi connection
  • relays can be automatically switched off after certain time defined by a user
  • there is a possibility to set a default value for a relay after power is restored
  • there is a possibility to set a default value for a relay after connection to MQTT Broker has been established
  • LED can inform about relay state
  • any GPIO can be assigned to relays, LEDs, and switches
  • Device IP address can be fixed or automatically assigned by router DHCP
  • configuration through the internet browser
  • upgrade to a newer version of firmware can be made through the internet browser
  • the configuration panel is in English or Polish

• Other:
  • Firmware is for Sonoff 4CH

[T5] Gate controller WiFi addon

It controls gate controller and allows connecting magnetic sensors and DHxx temperature and humidity sensor

Download

[wpdm_button_template id=’3328′ style=”blue” align=”left”][wpdm_button_template id=’3330′ style=”coffee” align=”left”]

• Hardware:
  • 1 x relay
  • up to 3 x LEDs
  • up to 2 x mono-stable switches, buttons
  • up to 2 x magnetic sensors or end-switches
  • 1 x temperature and humidity sensor DHxx (DH11,DH21,DH22)
• APIs: MQTT, HTTP
• Functionalities:

• • sending a signal to a gate controller over MQTT/HTTP protocol
  • sending a signal to a gate controller by pressing a button connected to ESP
  • the signal duration can be set from 1 millisecond to 2 seconds
  • a device sends automatically state of the gate, relay values from DHxx sensor
  • there is a possibility to get on demand a state of magnetic sensors and values from DHxx sensor over HTTP and MQTT
  • any GPIO can be assigned to relays, LEDs, switches, magnetic sensors and DHxx sensor
  • LEDs can indicate a state of a device and/or magnetic sensors
  • Device IP address can be fixed or automatically assigned by router DHCP
  • configuration through the internet browser
  • upgrade to a newer version of firmware can be made through the internet browser
  • the configuration panel is in English or Polish
• Others: